CLM HD8 - Projector Central
CLM HD8 - Projector Central
CLM HD8 - Projector Central
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9. Image menu<br />
The projected image should now be noisy full black<br />
If one uses a gray scale pattern, the bright spots should appear in the black bar.<br />
Performing White input balance<br />
1. Connect the source you want to project.<br />
2. Press MENU to activate the menus.<br />
3. Use the ▲ or ▼ key to select Image and press ENTER.<br />
4. Use the ▲ or ▼ key to select Image settings and press ENTER.<br />
5. Use the ▲ or ▼ key to select Input balance and press ENTER.<br />
6. Do you want to use an internally generated test pattern?<br />
If yes, Use the ▲ or ▼ key to select Test pattern and press ENTER to toggle between [on] and [off]<br />
If no, select a white pattern (or gray scale as alternative).<br />
7. Use the ▲ or ▼ key to select White balance and press ENTER.<br />
The white balance bar scale for a typical color is displayed.<br />
8. Toggle with the ▲ or ▼ key to select White balance red.<br />
Image 9-52<br />
Image 9-51<br />
Image 9-53<br />
Image 9-55<br />
Image 9-54<br />
9. Adjust the red white level (gain) on a minimal value<br />
10.Toggle with ▲ or ▼ key to Whitebalanceblueand adjust the blue white level (gain) on a minimal value.<br />
Note: This minimal value is not necessary , provided that the 2 other colors are not influencing too much the color to be adjusted,<br />
in fact the aim is to minimize the effect of the two other colors since there is a risk of reaching too soon the transition<br />
(bright spots) due to the contribution of these two other colors signals.<br />
11.Toggle with ▲ or ▼ key to White balance green and adjust the Green white level (gain) until bright spots appear on the screen.<br />
12.Toggle with ▲ or ▼ key to White balance blue adjust the Blue white level (gain) until bright spots appear on the screen.<br />
13.Toggle with ▲ or ▼ key to White balance red adjust the Red white level (gain) until bright spots appear on the screen.<br />
The projected image should now be noisy neutral gray.<br />
R59770057 <strong>CLM</strong> <strong>HD8</strong> 15/03/2010 81