8550, 8550N, 8550DN, 8550GN, 8550MFP Printer

Message Description Recommended Action
OUTPUT BIN FULL
alternates with
CLEAR PAPER FROM
FACE UP
OUTPUT BIN FULL
alternates with
CLEAR PAPER FROM
OPTIONAL BIN 1
PCL MEMORY FULL
STORED DATA LOST
PJL OPERATIONS
FAILED
PLEASE WAIT
POWERSAVE ON
PRESS SELECT IF
FUSER IS NEW
PRESS SELECT IF
TRANSFER IS NEW
The bin-full sensor in the left
Face-up Bin has been
reached.
The Stacker Bin is full.
The resource save area for
the printer personality is full.
Fonts downloaded to the
printer's RAM might have
been deleted.
The requested PJL operation
could not be completed
because the option is
unavailable or the PJL data
was corrupt.
The printer is in the process
of going offline or into the
menus.
The printer is in Power Save
mode.
The printer has detected that
a new fuser has been
installed.
The printer has detected that
a new transfer drum has been
installed.
Empty the Face-up Bin.
Empty the Stacker Bin.
Turn the printer off and on to
clear the printer's RAM.
No action is required.
No action is required.
Clear this message by
pressing any key.
If the fuser has been replaced,
press SELECT to reset the
internal counter. If the fuser
has not been replaced, press
GO.
If the transfer drum has been
replaced, press SELECT to
reset the internal counter. If
the transfer drum has not
been replaced, press GO.
EN Printer Messages 151