8550, 8550N, 8550DN, 8550GN, 8550MFP Printer

Changing Settings in the Printer Control Panel
Use the printer control panel to configure the default printer selections
and to obtain printer status information. Also, use the printer control
panel to access printer features not supported by your application.
For more information on navigating the printer control panel, see
“Printing Menu Maps” on the previous page.
Configuring Menu Selections
Use the following instructions to configure all printer control panel
settings, including the default printer settings.
To configure menu selections in the printer control
panel
1 Press MENU until the menu you want appears on the printer
control panel display.
2 Press ITEM until the item you want appears on the display.
3 Press -VALUE+ until the value you want appears on the display.
4 Press SELECT to save the selection. An asterisk (*) appears to the
right of the selection.
5 Repeat steps 1 through 4 until all of your changes are complete.
6 Press GO to bring the printer online.
Note
Changes to the printer control panel will not take effect until all current
data in the print buffer prints or until the next print job.
38 2 Using the Printer Control Panel EN