8550, 8550N, 8550DN, 8550GN, 8550MFP Printer

Setting the I/O Timeout
The I/O timeout sets the amount of time the printer waits after
receiving print data before switching I/O ports. The default time is
30 seconds.
To set the I/O timeout
1 Press MENU until I/O MENU appears on the printer control panel
display.
2 Press ITEM until I/O TIMEOUT appears on the display.
3 Press -VALUE+ until the interval you want (between 5 and
300 seconds) appears on the display.
4 Press SELECT to save the selection. An asterisk (*) appears to the
right of the selection.
5 Press GO to bring the printer online.
Note
If the I/O timeout is too short, print jobs might be incomplete. If the I/O
timeout is too long, print jobs might be unnecessarily delayed.
48 2 Using the Printer Control Panel EN