8550, 8550N, 8550DN, 8550GN, 8550MFP Printer
8550, 8550N, 8550DN, 8550GN, 8550MFP Printer
8550, 8550N, 8550DN, 8550GN, 8550MFP Printer
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Message Description Recommended Action<br />
TRANSFER KIT LOW<br />
REPLACE KIT<br />
TRANSFER KIT OUT<br />
REPLACE KIT<br />
TRAY 1 CONTAINS<br />
UNKNOWN MEDIA<br />
TRAY 1 LOAD<br />
<br />
The transfer drum, transfer<br />
belt, cleaning roller, and<br />
charcoal filter are almost past<br />
their specified life.<br />
The transfer drum, transfer<br />
belt, cleaning roller, and<br />
charcoal filter are past their<br />
specified life.<br />
Media was stacked in tray 1<br />
for continuous manual feed<br />
printing, and the job has been<br />
completed. However, there is<br />
still media in the input tray.<br />
The printer considers the<br />
input tray not to be<br />
configured.<br />
A user has requested a media<br />
size that is not currently<br />
installed in tray 1.<br />
is the last media type<br />
configured for the input tray.<br />
is the last media size<br />
configured for the input tray.<br />
Although printing can<br />
continue, the transfer kit<br />
should be replaced for<br />
optimum printer operation. For<br />
more information on replacing<br />
the transfer kit, see the<br />
installation guide included<br />
with the transfer kit.<br />
Replace the transfer kit and<br />
reset the transfer counter<br />
before attempting to print. For<br />
more information on replacing<br />
the transfer kit and resetting<br />
the counter, see the<br />
installation guide included<br />
with the transfer kit. For more<br />
information on configuring the<br />
printer response to this<br />
message, see “Selecting<br />
Toner Low Response” in<br />
chapter 2.<br />
Configure the media type for<br />
tray 1 or remove the<br />
remaining media. For more<br />
information on configuring the<br />
media type, see “Printing from<br />
Tray 1” in chapter 3.<br />
Load the media type and size<br />
specified on the printer control<br />
panel display. After the tray 1<br />
is loaded, the printer<br />
automatically brings itself<br />
online.<br />
For more information on<br />
configuring the printer control<br />
panel or checking printer<br />
control panel settings, see<br />
chapter 2, “Using the <strong>Printer</strong><br />
Control Panel.”<br />
156 7 <strong>Printer</strong> Control Panel Messages EN