8550, 8550N, 8550DN, 8550GN, 8550MFP Printer

Message Description Recommended Action
TONER LOW
REPLACE
TONER OUT
REPLACE
TOO MANY FILE
STORAGE DEVICES
REMOVE EITHER
DISK
TOO MANY PAGES
IN JOB TO STAPLE
TOP
OUTPUT BIN FULL
The printer is almost out of
the specified toner. The
printer remains online.
can be cyan,
magenta, yellow, or black.
The printer is out of the
specified toner and cannot
continue.
can be cyan,
magenta, yellow, or black.
The printer can only support
one printer hard disk at a
time.
The job height is greater than
the stapler capacity. The
height of the job to be stapled
should not exceed 5 mm.
The top (face-down) output
bin of the printer is full.
Although printing can
continue, the toner cartridge
should be replaced for
optimum printer operation. Do
not shake the toner
cartridge in attempts to
extend the cartridge life. For
more information on replacing
the toner cartridge, see the
installation guide included
with the toner cartridge. For
more information on
configuring the printer
response to this message,
see “Selecting Toner Low
Response” in chapter 2.
Printing cannot continue until
the specified toner cartridge
has been replaced. For more
information on replacing the
toner cartridge, see the
installation guide included
with the toner cartridge.
Turn the printer off and
remove either printer hard
disk. Printing will not continue
until one printer hard disk is
removed.
See the stapling specifications
on page 67 for more
information.
Remove all media from the
top (face-down) output bin on
the printer to continue
printing.
EN Printer Messages 155