8550, 8550N, 8550DN, 8550GN, 8550MFP Printer

More documents

Recommendations

Info

Printing Tips for Trays 2 and 3 z z z Handle transparencies by the edges to avoid leaving fingerprints on the transparencies. Use transparencies that meet the media specifications for this printer. Using the incorrect type of transparencies can damage the printer. For more information on transparencies, see “Supported Media Weights and Sizes for Input Trays” earlier in this chapter. Use letterhead that meets the media specifications for this printer. For more information on letterhead specifications, see “Preprinted Forms and Letterhead” earlier in this chapter. EN Printing from Trays 2 (some printer models only) and 3 83
Printing from Tray 4 (some printer models only) Load up to 2,000 sheets of 20 lb (75 g/m 2 ) bond paper in tray 4. To load media into tray 4 1 Firmly grip the handle in the center of the input tray, squeeze the release lever, and pull the input tray out until it stops. Note To use the media size currently configured in the input tray, go to step 5. To use a different size, go to step 2. 2 Adjust the front media guide by pulling up on the pin (A), placing the media guide into the slots on the top and bottom of the input tray that correspond to the media size you are loading (B), and pushing in the pin. 3 Repeat step 2 to adjust the back media guide. 4 Repeat step 2 to adjust the left media guide. Note For 11-by-17 inch media, move the left media guide to the back of the input tray. 84 3 Common Printing Tasks EN
Page 1 and 2:
8550, 8550N, 8550DN, 8550GN, 8550MF
Page 3 and 4:
Copyright Information © Copyright
Page 5 and 6:
CompuServe Printer drivers, updated
Page 7 and 8:
Asia-Pacific Countries/Regions Aust
Page 9 and 10:
European Customer Support Center La
Page 11 and 12:
HP Customer Care Centers Asia Pacif
Page 13 and 14:
12 EN
Page 15 and 16:
3 Common Printing Tasks Selecting M
Page 17 and 18:
8 Solving Printer Problems Performi
Page 19 and 20:
Paper Handling Note: See “Printer
Page 21 and 22:
Printer Information Configurations
Page 23 and 24:
Locating the Printer's Parts Figure
Page 25 and 26:
Optional Paper Handling Accessories
Page 27 and 28:
26 1 The HP Color LaserJet 8550 Pri
Page 29 and 30:
Printer Control Panel Keys and Indi
Page 31 and 32:
When to Use the Printer Control Pan
Page 33 and 34: Factory Defaults The following tabl
Page 35 and 36: Menu Item Factory Default PRINTING
Page 37 and 38: Menu Item Factory Default COLOR ADJ
Page 39 and 40: Changing Settings in the Printer Co
Page 41 and 42: Configuring Media Type and Size Con
Page 43 and 44: Selecting an Output Bin Select the
Page 45 and 46: Note If the requested media size is
Page 47 and 48: Setting the Power Save Mode The Pow
Page 49 and 50: Setting the I/O Timeout The I/O tim
Page 51 and 52: Selecting the Display Language Usin
Page 53 and 54: Interpreting the Configuration Page
Page 55 and 56: Duplex Registration The duplex regi
Page 57 and 58: Managing Memory The printer support
Page 59 and 60: 58 2 Using the Printer Control Pane
Page 61 and 62: z z Do not use media that has alrea
Page 63 and 64: Tray Location Media Type Media Size
Page 65 and 66: Bin Media Type Media Size (Common N
Page 67 and 68: Supported Media Weights and Sizes f
Page 69 and 70: Preprinted Forms and Letterhead Obs
Page 71 and 72: Transparencies CAUTION Use only tra
Page 73 and 74: Colored Media Colored media should
Page 75 and 76: Printing from Tray 1 Load up to 100
Page 77 and 78: To print envelopes from tray 1 1 Se
Page 79 and 80: Orienting Media Orienting Media in
Page 81 and 82: Printing from Trays 2 (some printer
Page 83: 9 Ensure that the media size tab on
Page 87 and 88: Printing Tips for Tray 4 (some prin
Page 89 and 90: Using the HP TonerGauge The HP Tone
Page 91 and 92: 4 From the software or printer driv
Page 93 and 94: Printing Multiple Pages on One Shee
Page 95 and 96: Quick Sets (continued) Printer Driv
Page 97 and 98: Deleting a Stored Quick Copy Job Wh
Page 99 and 100: A stored proof and hold job can als
Page 101 and 102: Deleting a Private Job A private jo
Page 103 and 104: Variable Data Printing Some applica
Page 105 and 106: Print on Backside of Heavy Media Pr
Page 107 and 108: Managing Fonts and Forms on Disk HP
Page 109 and 110: 108 4 Advanced Printing Features EN
Page 111 and 112: Using Color The color features of t
Page 113 and 114: ICC/CMS Some applications and opera
Page 115 and 116: Adjusting the Print Color and Quali
Page 117 and 118: Resolution Considerations for Graph
Page 119 and 120: Adjusting the Color Balance CAUTION
Page 121 and 122: 3 Determine the color adjustment nu
Page 123 and 124: Overall Color of Circles Correction
Page 125 and 126: Replacing Printer Consumables Figur
Page 127 and 128: Consumable Printer Message Page Cou
Page 129 and 130: 128 6 Maintaining the Printer EN
Page 131 and 132: Message Description Recommended Act
Page 133 and 134: Message Description Recommended Act
Page 135 and 136:
Message Description Recommended Act
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
160 7 Printer Control Panel Message
Page 163 and 164:
Working with Toner HP recommends th
Page 165 and 166:
Figure 16 A B C Upper Left Door Fus
Page 167 and 168:
Problem (Media jams, continued) Cau
Page 169 and 170:
Problem Media does not feed automat
Page 171 and 172:
Problem (Media does not feed from t
Page 173 and 174:
Problem Curled or wrinkled output C
Page 175 and 176:
Problem The multi-bin mailbox will
Page 177 and 178:
Problem (The printer is on, but not
Page 179 and 180:
Problem The printer is on, but cann
Page 181 and 182:
Problem Cannot print a configuratio
Page 183 and 184:
Problem Cannot select colors in the
Page 185 and 186:
Problem Partial printout Cause and
Page 187 and 188:
Problem (Missing colors, continued)
Page 189 and 190:
Problem Toner smear Cause and Solut
Page 191 and 192:
Problem Vertical bands or very dark
Page 193 and 194:
Problem Irregular, raised spots or
Page 195 and 196:
Problem (Dull or dark colors on tra
Page 197 and 198:
Problem (Repetitive defects, contin
Page 199 and 200:
Cleaning the Transfer Drum Perform
Page 201 and 202:
5 Lift the drum out of the printer.
Page 203 and 204:
Cleaning the Post Charger Clean the
Page 205 and 206:
Accessories, Options, and Related P
Page 207 and 208:
Part Part Number Type / Size Refere
Page 209 and 210:
To install a DIMM 1 Synchronous DRA
Page 211 and 212:
8 Insert the formatter board into t
Page 213 and 214:
Operating Environmental Specificati
Page 215 and 216:
z Paper Usage This printer either h
Page 217 and 218:
Material safety data sheet Material
Page 219 and 220:
Declaration of Conformity DECLARATI
Page 221 and 222:
DECLARATION OF CONFORMITY according
Page 223 and 224:
DECLARATION OF CONFORMITY according
Page 225 and 226:
VCCI Statement (Japan) Korean EMI S
Page 227 and 228:
Laser Statement for Finland Luokan
Page 229 and 230:
228 B Specifications EN
Page 231 and 232:
5. The warranty period begins on th
Page 233 and 234:
cleaning, transfer charger 203 clea
Page 235 and 236:
dpi, graphics 116 dpi, printer defa
Page 237 and 238:
lights, 3000-sheet Stapler/Stacker
Page 239 and 240:
print jobs, delayed 48 print jobs,
Page 241 and 242:
toner, lines 189 toner, low respons
show all

8550, 8550N, 8550DN, 8550GN, 8550MFP Printer

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?