CLIOwin 7 PCI User's Manual - Audiomatica
CLIOwin 7 PCI User's Manual - Audiomatica
CLIOwin 7 PCI User's Manual - Audiomatica
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4.5 HARDWARE CONTROLS TOOLBAR<br />
4.5.1 INPUT CONTROL<br />
channel A input peak meter<br />
Constantly monitors channel A input signal level vs.full digital input scale.<br />
Controls channel A input polarity.<br />
channel A input sensitivity display & control buttons<br />
Displays the actual input sensitivity (in dBV) of the instrument, i.e. the voltage level<br />
beyond which the hardware saturates. It is possible to modify it in 10dB steps by<br />
pressing the (F9) and/or (F10) buttons.<br />
channel B input peak meter<br />
Constantly monitors channel B input signal level vs.full digital input scale.<br />
Controls channel B input polarity.<br />
channel B input sensitivity display & control buttons<br />
Displays the actual input sensitivity (in dBV) of the instrument, i.e. the voltage level<br />
beyond which the hardware saturates. It is possible to modify it in 10dB steps by<br />
pressing the (SHIFT+F9) and/or (SHIFT+F10) buttons.<br />
Links input channels full scale level controls. If this button is pressed the two channel<br />
sensitivities are set equal and channel A controls act also on channel B.<br />
Selects the Autorange mode. When in autorange mode the input sensitivity is<br />
automatically adjusted by the instrument to achieve the optimum signal to noise<br />
ratio.<br />
4.5.2 INPUT/OUTPUT LOOPBACK<br />
The CLIO Box features an internal loopback which is very useful for performing self tests.<br />
Connects channel A output to channel A input with an internal relay.<br />
Connects channel B output to channel B input with an internal relay.<br />
4.5.3 GENERATOR CONTROL<br />
CLIO's generator can be controlled from the dedicated toolbar buttons and dialogs; for<br />
a reference about the possible kind of signal you may generate please see chapter 7.<br />
output level display & control buttons<br />
Displays the actual output level (in dBu) of the internal generator. This level is valid<br />
for both output channels. It is possible to modify it in 1dB steps pressing the (F7)<br />
and or (F8) buttons. If the Shift key is pressed simultaneously then the steps<br />
are of 0.1dB increments.<br />
40 Chapter 4 - <strong>CLIOwin</strong> basics