CLIOwin 7 PCI User's Manual - Audiomatica

5.3 FILE MENU AND MAIN TOOLBAR BUTTONS
Fig. 5.1 shows the File menu and the Export submenu. Refer to 4.5.1 for the shortcuts
active.
5.3.1 LOADING AND SAVING FILES
Fig.5.1 File Menu
Loads a measurement file relative to the active control panel. It is important to note
that it is possible to load more than one data file type from the following menu:
- MLS loads frequency response files (*.mls) and impedance response files (*.mlsi)
- FFT loads FFT files (*.fft) and CLIO4 RTA files (*.rta)
- Sinusoidal loads frequency response files (*.sin), impedance response files
(*.sini), CLIO4 sinusoidal frequency response files (*.frs) and CLIO4 impedance
response files (*.imp).
You can select the desired file type from the 'Files of type' drop down inside the Open
dialog box.
Fig.5.2 Open dialog
Saves a measurement file relative to the active control panel. It is important to note
that the following menu saves more than one data file type:
- MLS saves frequency response files (*.mls), impedance response files (*.mlsi) or
impulse response as wave files (*.wav)
- Sinusoidal saves frequency response files (*.sin) and impedance response files
(*.sini)
- Leq saves Leq analysis files (*.leq) and captured data wave files (*.wav)
Chapter 5 - System Operations and Settings 57