Tutorials Manual

More documents

Recommendations

Info

Chemkin 4.1.1 Chapter 2: Combustion in Gas-phase Processes After the specification of the inputs for the parameter study, the parameter would appear in blue, as shown below in Figure 2-18. This shows that the setup of the parameter study is complete for that parameter. Several parameters can be varied at the same time, if desired. Figure 2-18 Parameter Shown in Blue After Parameter Setup is Complete Once the setup is done, to run the parameter study, choose the Run Parameter Study panel from the project tree. After clicking the Run Parameter Study button, the upper window shown in Figure 2-19, appears. The graphical User Interface gives the option of choosing which cases to run. For choosing all runs, press Select All, and for running the model, press Run Selected. While the model is running, the lower window in Figure 2-19 shows the status of the runs. After the runs are finished, if the user wants to access the output file, the Run Parameter Study window in Figure 2-19 has buttons for Click to View Results for each of the runs. Results can be postprocessed after the runs are finished (from the same Run Parameter Study window shown in Figure 2-19). © 2007 Reaction Design 42 RD0411-C20-000-001
Chapter 2: Combustion in Gas-phase Processes <strong>Tutorials</strong> <strong>Manual</strong> Figure 2-19 Parameter Study Run 2.3.6.3 Project Results After running the parameter studies, several additional post-processing options are available. By selecting the Line plot from Plot Type in the Post-Processor, options appear for accessing the calculated results as shown in Figure 2-20. The first and second options are exclusive to parameter studies. RD0411-C20-000-001 43 © 2007 Reaction Design
Page 1 and 2: August 3, 2007 1:53 am Release 4.1.
Page 3 and 4: Chemkin 4.1.1 Contents Table of Con
Page 5 and 6: Chemkin 4.1.1 Tables List of Tables
Page 7 and 8: Tutorials Manual 4.1.1 Figures List
Page 9 and 10: List of Figures Tutorials Manual 2-
Page 11 and 12: List of Figures Tutorials Manual 4-
Page 13 and 14: Chemkin 4.1.1 1 1 Introduction The
Page 15 and 16: Chapter 1: Introduction Tutorials M
Page 17 and 18: Chemkin 4.1.1 2 2 Combustion in Gas
Page 19 and 20: Chapter 2: Combustion in Gas-phase
Page 41: Chapter 2: Combustion in Gas-phase
Page 91 and 92: Chemkin 4.1.1 3 3 Catalytic Process
Page 93 and 94:
Chapter 3: Catalytic Processes Tuto
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Chemkin 4.1.1 4 4 Materials Problem
Page 117 and 118:
Chapter 4: Materials Problems Tutor
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Chemkin 4.1.1 5 5 Chemical Mechanis
Page 163 and 164:
Chapter 5: Chemical Mechanism Analy
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Tutorials Manual 4.1.1 Index Index
Page 179 and 180:
Index Tutorials Manual normalized s
show all

Tutorials Manual

Create successful ePaper yourself

Delete template?

Save as template?