Tutorials Manual
Tutorials Manual
Tutorials Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chemkin 4.1.1<br />
Chapter 2: Combustion in Gas-phase Processes<br />
Figure 2-20<br />
Post-Processor Options after Running Parameter Studies<br />
2.3.6.3.1 Cluster vs parameter<br />
The first option, the Cluster1C1 vs parameter option, gives the output of most<br />
interest for this problem, i.e., the flame speed, as a function of equivalence ratio. The<br />
flame speed is not shown as an option for single runs, since it is just one data point.<br />
However, for parameter studies, flame speed is a characteristic that can be plotted,<br />
and is shown in Figure 2-21.<br />
The calculated flame speeds are compared with some experimental data 11,12,13 in<br />
Figure 2-21. This figure shows that the flame speed peaks at a stoichiometric ratio<br />
slightly larger than 1. The calculated values seem consistent with experimental data<br />
over the range of equivalence ratios simulated.<br />
11. C.M. Vagelopoulos and F.N. Egolfopoulos, Proc. Combust. Inst. 27 (1998) 513.<br />
12. C.J. Sun, C.J. Sung, L. He and C.K. Law, Combust. Flame 118 (1999) 108.<br />
13. S. Kwon, L.K. Tseng and G.M. Faeth, Combust. Flame 90 (1992) 230.<br />
© 2007 Reaction Design 44 RD0411-C20-000-001