11.10.2014 Views

b-1 tender form - Maharashtra Industrial Development Corporation

b-1 tender form - Maharashtra Industrial Development Corporation

b-1 tender form - Maharashtra Industrial Development Corporation

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

31<br />

m) Suitable precautions shall be taken to prevent persons being struck by articles<br />

which might fall from scaffolds or other working places.<br />

n) Safe means of access shall be provided to all working plat<strong>form</strong>s and other<br />

working places.<br />

CLAUSE 22 :<br />

The contractor shall comply with the following regulations as<br />

regards hoisting appliances to be used by him :<br />

a) Hoisting machines and tackles, including their attachments, anchorages and<br />

support shall: -<br />

i. Be of good mechanical construction, sound material & adequately strength<br />

& free from patent defect; &<br />

ii. Be kept in good repair and in good working order.<br />

b) Every rope used in hoisting/lowering materials or as a means of suspension<br />

shall be of suitable quality, adequate strength & free from patent defect.<br />

c) Hoisting machines and tackle shall be examined and adequately tested after<br />

erection on the site and before use and be re-examined in position at intervals<br />

to be prescribed by the MIDC.<br />

d) Every chain, ring, hook, shackle, swivel & pulley block used in<br />

hoisting/lowering materials or as a means of suspension shall be periodically<br />

examined.<br />

e) Every crane driver/hoisting appliance operator shall be properly qualified.<br />

f) No person who is below the age of 18 years shall be in control of any hoisting<br />

machine including any scaffold or give signals to the operator.<br />

g) In the case of every hoisting machine & of every chain, ring, hook, shackle,<br />

swivel & pulley block used in hoisting/lowering/as a means of suspension<br />

the safe working load shall be ascertained by adequate means.<br />

h) Every hoisting machine and all gears referred to the preceding regulation<br />

shall be plainly marked with the safe working load.<br />

i) In the case of a hoisting machine having a variable safe working load each<br />

safe working load and the conditions under which it is applicable shall be<br />

clearly indicated.<br />

j) No part of any hoisting machine or of any gear referred to in regulation ‘g’<br />

above shall be loaded beyond the safe working load except for the purpose of<br />

testing.<br />

k) Motors, gearings, transmissions, electric wiring and other dangerous parts of<br />

hoisting appliance shall be provided with efficient safe guards.<br />

l) Hoisting appliances shall be provided with such means as will reduce to a<br />

minimum the risk of the accidental descent of the load.<br />

m) Adequate precautions shall be taken to reduce to a minimum the risk of any<br />

part of a suspended load becoming accidentally displaced.<br />

CLAUSE 23 : Measure for prevention of fire : The contractor shall not set fire to<br />

any standing jungle, trees brushwood or grass without written permit from the<br />

Executive Engineer (E&M).<br />

Contractor.<br />

Executive Engineer(E&M).

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!