b-1 tender form - Maharashtra Industrial Development Corporation
b-1 tender form - Maharashtra Industrial Development Corporation
b-1 tender form - Maharashtra Industrial Development Corporation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
68<br />
7 13.00<br />
8 2.00<br />
9 7.00<br />
10 5.00<br />
11 10.00<br />
12 10.00<br />
13 20<br />
14 20<br />
15 17.1<br />
Providing and fixing hinges manufactured as per best<br />
engineering practice or as per IS wherever they apply for<br />
door & windows with necessary materials and labour costs<br />
etc. complete.<br />
D] Standard Stainless Steel hinges<br />
Providing and fixing aldrops of 16 mm diameter bars<br />
manufactured as per best engineering practice wherever they<br />
apply for doors and windows with necessary materials and<br />
labour etc. complete.<br />
D] Standard Stainless Steel make Aldrop (IS:2681-1993)<br />
Providing and fixing tower bolts 12 mm diameter as per best<br />
engineering practice con<strong>form</strong>ing to IS:204-1992 (Part I,II) for<br />
doors & windows with necessary materials and labour<br />
complete.<br />
c) Standered Stainless steel make.<br />
Providing and fixing handles manufactured as per IS:208-<br />
1992 for doors and with all materials like screws etc. and all<br />
labour complete.<br />
D) Standered Stainless steel<br />
Nos. 50.00 650.00<br />
Nos. 50.00 100.00<br />
Nos. 470.00 3290.00<br />
Nos. 34.00 170.00<br />
Providing and fixing hydraulic door closer manufactured as<br />
per best engineering practice as per IS:3564 for doors and<br />
windows with necessary materials and labour cost etc. Cum. 760.00 7600.00<br />
complete.<br />
a) Light ( for shutter weight up to 35 kg)<br />
Excavation in trenches, pits, pipe lines, foundations, column<br />
footings, walls etc. in earth’s soils of all types, gravel,<br />
sand, soft & hard murum, and boulders up to 0.03 cum.<br />
size including removing the excavated material upto a<br />
distance of 50 M beyond the edge of excavation including the<br />
initial lift of 1.5 M, stacking or spreading as directed, bailing of Cum. 140.00 1400.00<br />
sub-soil water if any preparing base for foundation etc., and<br />
back filing the excavated pit or trench using the excavated<br />
material in layers including watering and ramming as required<br />
or as directed by Engineer-In-charge, including all labour and<br />
materials complete.<br />
Providing murum bedding below pipeline and filling on the<br />
top of the pipeline with selected material in 15 to 20 cm<br />
layers including watering, ramming etc. complete. Cum. 140 2800<br />
c) With material brought by contractor from MIDC area.<br />
Providing and fixing in line & level paver blocks as specified.<br />
The paver blocks shall confirm to BS 6717 ASTM C 936 - 96<br />
including providing and preparing sand beds as specified,<br />
fixing blocks in position at site, filling the joints by jointing<br />
sand, compacting the blocks by plate vibrator including filling<br />
the side joints by m-20 grade cement concrete if required etc.<br />
complete.<br />
a) 60 mm thick (strength 35 M pa) on sand bed 30 mm thick<br />
Providing and fixing in position collapsible steel shutters<br />
with vertical channels 20 x 10 x 2 mm & braced with flat iron<br />
diagonals 20 x 5 mm size top & bottom T section 40 x 40 x 6<br />
mm size 30 mm steel pulleys complete with bolts-nuts,<br />
locking arrangements, stoppers, handles and painting of two<br />
coats of synthetic enamel over 1 coat of red oxide zinc<br />
chromate primer and 2 coats of synthetic enamel paint. All<br />
labour and materials complete.<br />
Sq.M 950.00 19000.00<br />
Sq.M 2500.00 42750.00<br />
Contractor.<br />
Executive Engineer(E&M).