AutoVu Handbook 5.1 SR2 - Genetec

Mobile installation procedure for Sharp
IMPORTANT You don’t necessarily need to install the tire cameras as described in this
section, but however you choose to install them, you must make sure that they are at an
appropriate height and that the lenses are correctly positioned to capture tire images.
NOTE The tire cameras included with your AutoVu kit are third-party cameras. Therefore,
if you need more detailed information on the proper installation of your tire cameras, you’ll
need to refer to the cameras’ documentation.
1 Open your vehicle’s trunk.
2 Using the screws provided with your tire cameras, attach the cameras to the rear wall of
your vehicle’s trunk.
NOTE Never install the cameras directly on the vehicle’s bumper, as even a slight
collision could damage the cameras.
Tire cameras installed on
the rear trunk wall.
Make sure your tire
camera lenses are
facing outward to
properly capture tire
images.
genetec.com | AutoVu Handbook 5.1 SR2 | Download latest version 89
EN.400.003-V5.1.C2(1)