AutoVu Handbook 5.1 SR2 - Genetec

Upgrading Patroller and Sharp units from Security Center
3 From the Config Tool Home page, go to LPR > General settings > Updates.
You’ll see an active Update button next to all eligible updates
Y
4 Click Update to update individual components, or click Update all to update all eligible
components on the list.
NOTE The Update all feature updates only the components on the active tab.
5 Under Status, monitor the status of the update.
NOTE If you see the message “Waiting for connection...” it means that Security Center
is not connected to the component you’re trying to update (e.g. the Patroller vehicle is
not in range of the WiFi network).
After you are done: The following will occur for each AutoVu component:
• Patroller. After the update has been downloaded to Patroller, the Patroller operator
must accept the update in the Patroller application (similar to the update process for
Microsoft Windows). An update icon appears in the Patroller notification bar. When
the Patroller operator clicks the update icon, the update is installed, and the Patroller
application restarts.
• Sharp. A mobile Sharp update is processed through Patroller, and the Patroller operator
must accept the update as if it were a Patroller update (see Patroller). The only difference
is that the Sharp unit is restarted rather than Patroller. A fixed Sharp update
does not require any further user interaction. The fixed Sharp is restarted and continues
working normally.
genetec.com | AutoVu Handbook 5.1 SR2 | Download latest version 118
EN.400.003-V5.1.C2(1)