AutoVu Handbook 5.1 SR2 - Genetec

Setting up USB support
Set Root folder and the USB drive letter on the Security Center
computer
Before you begin: You’ll need the following information:
• The drive letter used for the USB device. Insert your USB device in the Security Center
computer, and take note of the letter the computer assigns to the USB drive.
IMPORTANT When you configure USB support, make sure you always use the same USB
drive letter, especially if your computer has multiple USB ports.
• Path to the LPR Manager Root folder on the Security Center computer. You can find
this information in Config Tool. From the Config Tool Home page, go to LPR > Units
> Options > General Settings. You’ll see the path next to Root folder (e.g. C:\LPR root
folder).
To set the root folder and USB drive letter:
1 Go to C:\ServerPC.
2 Open PatrollerFiles_to_USB.cmd, and edit the LPR Manager root folder and USB drive
paths to match your settings.
EXAMPLE
xcopy /e/v/y "C:\AutoVu\ManualTransfer\*.*" "E:\ManualTransfer\"
3 Open USB_OffloadFiles_To_GSC.cmd, and edit the USB drive and the Offload folder
paths to match your settings.
EXAMPLE
move "E:\Offload\*.*" "C:\AutoVu\Offload\"
On the Security Center computer, when you click on the shortcut FileTransfer.vbs, the file
transfer dialog box appears. From the dialog, you can choose to Copy the Patroller configuration
to the USB key or Offload the Patroller data from the USB key.
NOTE Before you copy Patroller configuration files to a USB device, make sure that the LPR
Manager has finished parsing the hit rules.
Set up USB support on the Patroller computer
To set up USB support on the Patroller computer, do the following:
• Install USB batch files on Patroller
• (Optional) Install USB autorun
• Set Offload folder and the USB drive letter on Patroller
Install USB batch files on Patroller
1 In the Patroller installation package, go to Tools\USB Batch Files\.
2 Select the language folder.
genetec.com | AutoVu Handbook 5.1 SR2 | Download latest version 141
EN.400.003-V5.1.C2(1)