AutoVu Handbook 5.1 SR2 - Genetec

4
AutoVu mobile deployment overview
This section provides an overview of how to install and configure a mobile AutoVu system
for Law Enforcement.
IMPORTANT This document/section was not complete at the time of publication. We are
constantly updating our guides as new information becomes available. Click here for the
most recent version of this document.
NOTE The AutoVu product allows you to customize a deployment in a variety of ways. For
this reason, only the tasks for a typical deployment are provided.
This section includes the following topics:
• "About the mobile deployment process overview" on page 41
• "AutoVu deployment prerequisites" on page 41
• "Understanding how Patroller unit entities are created" on page 41
• "Phase 1: AutoVu hardware installation" on page 42
• "Phase 2: AutoVu software installation and Sharp upgrade" on page 43
• "Phase 3: Configure Sharp units for a mobile AutoVu system" on page 44
• "Phase 4: Configure LPR Manager for a mobile AutoVu system" on page 45
• "Phase 5: Configure hotlists" on page 51
• "Phase 6: Configure Patroller unit settings from Security Center" on page 56
• "Phase 7: Configure Patroller" on page 58
genetec.com | AutoVu Handbook 5.1 SR2 | Download latest version 40
EN.400.003-V5.1.C2(1)