AutoVu Handbook 5.1 SR2 - Genetec

Moving Patroller or LPR units between LPR Managers
• For Patroller units:
a Open Patroller Config Tool.
b Go to Security Center > Live connection, and update the IP address, Port, and
Update provider port settings to match the settings for the new LPR Manager that
is now controlling the unit.
For more information, see "Live connection" on page 207.
• For LPR units:
c Log on to the Sharp Admin.
d Go to the Configuration page, and then under Extension, update the Address,
Port, Discovery port, and Update provider port settings to match the settings for
the new LPR Manager that is now controlling the unit.
For more information, see "Extension" on page 234.
• For hotlists, permit lists, and Patroller user groups (if applicable):
e Log on to Config Tool.
f From the Config Tool Home page, go to System > Roles, click on the LPR Manager
that is now controlling the unit you moved, and then go to Properties.
g Activate the hotlists and permit lists, and assign a Patroller user group for this LPR
Manager.
The unit can now communicate with its new LPR Manager.
genetec.com | AutoVu Handbook 5.1 SR2 | Download latest version 152
EN.400.003-V5.1.C2(1)