AutoVu Handbook 5.1 SR2 - Genetec

Mobile installation examples for Sharp
The following illustration and table provide information on each required the component:
Component
What you should know
A: Sharp Camera • Magnetic mount Sharps can also be used. For more information, see
"Magnetic mount installation" on page 91.
• Make sure to secure the Sharp cable to the Sharp by turning the outer
connector ring clockwise.
• Do not bring the camera through a mechanical car wash.
B: GPS antenna • Connects to Navigator unit.
• Try to install the GPS antenna on the roof as close to the Sharp
cameras as possible for an accurate signal.
• Must have an unobstructed view of the sky for best results.
C: Breakout box • The breakout box can be installed anywhere in the vehicle, but make
sure that the heat sink fins are not blocked, and that the unit is
protected from being jostled or moved by other objects in the vehicle.
• It is best practice to install the breakout box where it will not be in
direct sunlight for an extended period of time.
genetec.com | AutoVu Handbook 5.1 SR2 | Download latest version 81
EN.400.003-V5.1.C2(1)