AutoVu Handbook 5.1 SR2 - Genetec

Fixed installation procedure
by the manufacturer for whichever connector and cable you use. For extra protection,
you can also use butyl tape to seal the full mated cable.
NOTE: Push the heat sink tubing
up to the backshell ring of the
connector, not just over the
crimp ferrule. This will prevent
water from leaking through the
braids of the coaxial shield.
Crimp ferrule
Backshell ring
• The TNC plug you use should be made for 75 ohm video coaxial cable, such as RG-59
cable.
genetec.com | AutoVu Handbook 5.1 SR2 | Download latest version 76
EN.400.003-V5.1.C2(1)