AutoVu Handbook 5.1 SR2 - Genetec

About the mobile deployment process overview
About the mobile deployment process overview
The deployment process is divided into phases. Each phase explains at a high level what you
need to do, and provides the basic steps for you to complete the task. For the more complex
configuration tasks, you’ll find links to other sections in this guide (e.g. the Config Tool
reference section) that provide the more detailed information you’ll need to complete the
task.
AutoVu deployment prerequisites
This section provides an overview of the prerequisites for deploying an AutoVu system.
NOTE The AutoVu product allows you to customize a deployment in a wide variety of ways.
For this reason, only the tasks for a typical deployment are provided.
Before you deploy AutoVu, do the following:
• Read the various release notes:
• Security Center Release Notes
• AutoVu Hardware Release Notes
• AutoVu Patroller Release Notes
For more information, see "Product documentation" on page iii.
• Have the information from your initial site survey on hand when you install the
AutoVu hardware. For example, before installing the hardware you should know how
high to install the Sharp camera, how many lanes you need to capture, and what pan/
tilt angles are required to capture plates.
Understanding how Patroller unit entities are created
The Security Center LPR Manager role manages and controls Patrollers. It automatically
detects Patrollers on the network and adds them to the Security Center system. The LPR
Manager creates a Patroller entity when a Patroller application connects to Security Center
via a designated LPR Manager.
genetec.com | AutoVu Handbook 5.1 SR2 | Download latest version 41
EN.400.003-V5.1.C2(1)