AutoVu Handbook 5.1 SR2 - Genetec

Configuration
Setting
Description
Port • For Security Center only. Enter the port through which to connect
to Security Center. This port must match the port entered
under the Live settings on the LPR Manager Options page. For
more information, see "Live" on page 188.
Discovery port
Port on which the Sharp listens for discovery requests. This setting is
available for both Security Center and Patroller extensions:
• For Security Center. This port number must match the port
entered on the LPR Manager Properties page. For more information,
see "Properties" on page 184.
• For Patroller. This port number must match the port entered on
the Patroller Config Tool Cameras page. For more information,
see "Cameras" on page 212.
Control port • For Security Center only. Used in Config Tool when enrolling a
new LPR unit manually. For more information, see "LPR Unit
entity" on page 167.
Video port • For Security Center only. The port used for streaming live video
from the Sharp’s context camera. For more information, see "LPR
Unit entity" on page 167.
Update Provider port • For Security Center only. The Sharp receives updates from Security
Center on this port. To update the Sharp, you need to enable
the Update provider on the LPR Manager Options page, and the
port numbers must match. For more information, see "Update
provider" on page 195.
Note For more information on the entire Sharp update process, see
"Upgrading Patroller and Sharp units from Security Center" on
page 115
Accept remote reboot
requests
• For Security Center only. Select this so that you can reboot the
Sharp from the LPR Unit Properties page. For more information,
see "Properties" on page 168.
Inputs
Displays the status of the SharpX LPR Processing Unit inputs. These inputs are typically
used for tire imaging.
Setting
Name
Description
Letter of the input.
genetec.com | AutoVu Handbook 5.1 SR2 | Download latest version 235
EN.400.003-V5.1.C2(1)