AutoVu Handbook 5.1 SR2 - Genetec

Advanced
Advanced
Analytics
The Advanced page allows you to configure advanced Patroller options. Most AutoVu
deployments do not require advanced options to be modified.
IMPORTANT This document/section was not complete at the time of publication. We are
constantly updating our guides as new information becomes available. Click here for the
most recent version of this document.
IMPORTANT Advanced settings in Patroller Config Tool are used mostly by Genetec
Technical Support for diagnostic and debugging purposes. There are only a few settings that
you should attempt to modify yourself, and they are documented in this section. For all the
other advanced settings, you should contact your Genetec representative before you attempt
to modify them.
Setting
Display following analytics
fields
Description
Display additional information in the Patroller information
panel for a read or hit. Type one of the following (case-sensitive)
to active the feature:
• Motion Detection. When Patroller reads a plate, it detects
and displays if the vehicle is approaching or moving away.
• Vehicle Type. Certain license plates include character symbols
that identify specific vehicle types (e.g. taxi, transport,
etc). Patroller reads these symbols, and displays the vehicle
type along with the other read/hit information.
Hit
Setting
Confirm real time
Description
Turn on to require a confirmation of a hit status (enforced, not
enforced) in the real-time mode.
Hit hotlist
Setting
Use simple matcher
Description
Turn on the SimpleMatcher feature. Simple matcher reduces the LPR
matching mechanism in order to minimize the number of false hits
that can occur, especially in Law Enforcement installations using very
large hotlists.
genetec.com | AutoVu Handbook 5.1 SR2 | Download latest version 222
EN.400.003-V5.1.C2(1)