AutoVu Handbook 5.1 SR2 - Genetec

Status
Actions
Displays several actions you can perform.
Setting
Reboot Sharp
File versions
Export diagnostic data
Change password
Show Extension details
Configure the other
unit
Description
Click to reboot the Sharp unit. You will be asked to confirm reboot. If
you reboot the Sharp, you’ll lose connection to the Sharp Admin. Wait
a few minutes for the Sharp to reboot, and then refresh the Web page
to log on again.
Displays the versions of the various services running on the Sharp.
You can use this information to confirm your Sharp is up to date.
Click to export the unit diagnostic data. Select a folder, and then click
Save.
Click to change the password you use to log on to the Sharp Admin.
Best practice: You should always change the default password
after you log on for the first time, especially if you configure the
Sharp for HTTPS encryption. For more information on using
HTTPS encryption, see "Portal Security" on page 230
When you have an extension configured (see "Extension" on
page 234), this will display information about that extension’s status.
If you are connected to a SharpX - Multi, this opens a new Sharp
Admin window so you can configure the SBC (single board computer)
that controls the other SharpX camera unit. For more information, see
"AutoVu SharpX components" on page 4.
System resources
Displays the status of the Sharp hardware.
Setting
CPU
Description
Displays the Sharp CPU usage.
Note If you see two CPU bars in this section, it means you are
connected to a Sharp unit that has a dual-core SBC (single board
computer).
Usage (%)
Memory
Free space (MB)
Total space
The current CPU usage.
Displays the memory drives.
Displays the amount of free space left on the memory drives.
Displays the total space (in MB) available on the memory drives.
genetec.com | AutoVu Handbook 5.1 SR2 | Download latest version 227
EN.400.003-V5.1.C2(1)