AutoVu Handbook 5.1 SR2 - Genetec

Connecting Sharp units to Patroller
5 (Optional) Select the Sharp camera’s initial exposure settings. In general, higher exposure
is for darker environments, and lower exposure is for brighter environments.
NOTE The Sharp has auto-exposure capability that compensates for different plate
reflectivity, as well as exterior ambient light. You shouldn’t need to change the default
value for this setting.
6 (Optional) Click Start suspended mode to start Patroller with plate reading turned off.
7 (Optional) Make sure the Discovery port matches the discovery port value for the
Sharp camera.
8 Click Apply.
genetec.com | AutoVu Handbook 5.1 SR2 | Download latest version 139
EN.400.003-V5.1.C2(1)