equipment sourcebook - Loctite.ph

DISPENSING Dispense Systems
SYRINGE DISPENSING SYSTEMS
LOCTITE ® PRECISION SYRINGE DISPENSING SYSTEM
Item Number: 97006
The Loctite® Precision Syringe Dispenser is a pressure-time-vacuum unit designed
to dispense adhesive products packaged in 3, 5, 10, 30, 55 and 300 ml cartridges.
The unit can be operated in the manual or automatic timed dispense mode to
dispense dots, beads, or to fill syringes.
Features:
• Precision air pressure regulator for precise application of small dots
• Precise digital display of dispense pressure, 0 to 100 psi
• Digital timer display, for precise timer settings
• Vacuum suck-back feature to prevent
dripping and stringing
• “Stand-up” design, requires minimal bench space
• Detects ±10% variation from set pressure and
alerts operator if detected
Power Supply
Theory of Operation
This system uses all digital controls to regulate time and air
pressure applied to an adhesive or fluid contained within any
syringe barrel. When the dispense cycle is initiated, a pulse of
air, either timed or manually controlled, is transmitted to the
top of the syringe barrel via an air line adapter (required and
sold separately). The amount of product dispensed is controlled
by the amount of pressure applied to the product, the length of
the dispense cycle, the size of the dispense needle, product
viscosity, and temperature.
Air Supply
Pressure Regulator
Product Viscosity
Dispense Time Range
Dimensions
Weight
Used to Dispense
Package Types & Sizes
Parts Included
Air Line Adapters
(Required for syringe
dispensing, see page 83.)
Additional Information
TECHNICAL SPECIFICATIONS
Selectable 90/260 VAC; 47/63 Hz
Minimum - 30 psi
0 to 100 psi
Low to Paste
0.01 to 99.9 minutes
5.9" W x 9.0" H x 10.4" D
6.17 lbs.
Gel Adhesives, Instant Adhesives, Light Cure/Acrylics,
Retaining Compounds, Threadlockers
3 ml / 5 ml / 10 ml / 30 ml / 55 ml syringes
(1) Digital Syringe Controller (1) Foot Switch
(1) Power Cord (1) Manual
For 3 ml syringe dispensing: order 98656
For 5 ml syringe dispensing: order 98657
For 10 ml syringe dispensing: order 97208 or 97216
For 30 ml syringe dispensing: order 97244 or 97294
For 55 ml syringe dispensing: order 97245 or 98416
For Syringe Accessories, see page 83.
For Dispense Tips, see pages 80-81.
Additional Accessories Sold Separately for 97006 and 883976
98501 – Loctite ®
Applicator Holder
988896 – Loctite ® Syringe Finger
Switch Assembly. Used in place of the
foot switch to allow finger actuation
while holding the syringe barrel.
984625 – Loctite ®
Vertical Syringe Stand
11