equipment sourcebook - Loctite.ph

LOCTITE ® POSI-LINK 50 ML
DUAL CARTRIDGE NESTS
Item Number: See chart
Connects the actuator
to the dual cartridge.
Dual Cartridge Nest Features:
• No tool cartridge changeover
• No contact with adhesive. Disposable syringes
are the only component in contact with the adhesive
Loctite ® Posi-Link Dual Cartridge Nest Selection
LOCTITE ® POSI-LINK 200/400 ML
DUAL CARTRIDGES NESTS
Item Number: See chart
Connects the actuator
to the dual cartridge.
1:1 / 2:1 – 50 ml Cartridge 10:1 – 50 ml Cartridge 1:1 / 2:1 – 200 ml Cartridge 1:1 / 2:1 – 400 ml Cartridge 10:1 – 400 ml Cartridge USED WITH
DISPENSING
Two-Part Volumetric
Dispensing
Dual Cartridge Systems
98641 98642 N/A N/A N/A
N/A N/A 98662 98663 98664
Loctite ® Posi-Link
10-50 Actuator
Loctite ® Posi-Link
200-400 Actuator
Theory of Operation
A disposable dual cartridge is effectively used as a dual metering piston/cylinder. Because the individual chambers of a dual
cartridge are of a known and constant diameter, a given incremental measurement of the dual pistons will displace a known
volume of adhesive within each chamber at an exact ratio. This dual cartridge system functions identically to a Loctite® Posi-Link
Syringe System, except that it has 2 plungers within the dispense head. These plungers simultaneously act on 2 chambers within
the dual cartridge. See Functionality Diagram on page 10.
LOCTITE ® PINCH TUBE VALVE Item Number: 97141
Features:
• Valve attaches directly to
the end of the
square mix nozzle
• Provides positive no-drip
shut off, using disposable
pinch tube elements
FOR 50 ML DUAL CARTRIDGES:
OPTIONAL: 97141 – Valve +
97541 – 10 pack Replacement Tube Inserts + 98671 – Solenoid Valve
FOR 200/400 ML DUAL CARTRIDGES:
REQUIRED: 97141 – Valve +
97541 – 10 pack Replacement Tube Inserts
(98671 – Solenoid Valve included with actuator)
Loctite ® Posi-Link 10-50 System, Integrated Robotic Solution using
a 50 ml dual cartridge, and showing wall-mounted actuator.
PRODUCT
TECHNICAL SPECIFICATIONS
Loctite ® Posi-Link
Controller
Loctite ® Posi-Link
10-50 Actuator
Loctite ® Posi-Link
200-400 Actuator
Item Number 98377 98379 98380
Power
Source
9' communication
cable
100/240 VAC;
47/60 Hz
100/240 VAC;
47/60 Hz
Dimensions 5.375" H x 6" D x 6" W 34" H x 4" D x 5" W 34" H x 4" D x 5" W
Total Weight 2 lbs. 13 lbs. 20 lbs.
Dispense Head
Weight
(Includes Nest and
N/A 2.0 lbs. 10.0 lbs.
Pinch Tube Valve)
Air Supply N/A 40 to 100 psi 40 to 100 psi
Posi-Link
Electro/Hydraulic N/A 7 feet 7 feet
Tether
Minimum
Dispense Volume
N/A 0.001 ml 0.01 ml
Maximum
Dispense Rate
Maximum
Cycle Rate
Used to
Dispense
N/A 0.4 ml/second 1.0 ml/second
N/A 1 cycle per second 1 cycle per second
N/A
Parts Included (1) Loctite ®
Posi-Link
Controller
(1) Foot Switch
Additional
Information
All dual 50 ml cartridge
1:1 / 2:1 / 10:1
ratio adhesives
All dual 200 or 400 ml
cartridge 1:1 / 2:1 / 10:1
ratio adhesives
(1) Loctite ® Posi-Link Actuator
(1) 9' Controller/Actuator Signal Cord
(1) 110 Power Cord
(1) Air Inlet Pressure Regulator Gauge
(1) Wall or Table Mounting Bracket
(1) Instruction Manual
For Spare Parts and Accessories, see pages 84-85.
For Static Mix Nozzles and Accessories, see page 82.
For additional information and the full line of equipment, visit www.equipment.loctite.com.
31