equipment sourcebook - Loctite.ph
equipment sourcebook - Loctite.ph
equipment sourcebook - Loctite.ph
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DISPENSING<br />
Monitoring Systems<br />
Monitoring<br />
Systems<br />
These state-of-the-art detection systems allow real time process monitoring of dispense<br />
cycles. Whether you’re looking to determine the presence of adhesive via fluorescence<br />
detection, or the amount of adhesive dispensed for an individual dispense nozzle, Henkel<br />
has the system that will get the job done with a high degree of precision and reliability.<br />
LOCTITE ® FLUORESCENCE DETECTOR<br />
Item Number: 98083<br />
Designed for the detection of fluorescent adhesives,<br />
this unit connects to an in-house power supply<br />
and PLC for monitoring of dispense processes<br />
utilizing fluorescent adhesives and sealants.<br />
Three interchangeable lenses are available for<br />
various detection distances. A 100,000 hour<br />
LED life ensures consistent and long-term<br />
process monitoring.<br />
Features:<br />
• 100,000 hours LED life<br />
• 250 microsecond maximum response<br />
time between detection points<br />
• 3 lens options (sold separately) allow for<br />
various detection distances<br />
• Common light output and fluorescence detection path<br />
• Equipped with a learn mode feature, allowing<br />
the programming of part detection with minimal effort<br />
• NPN and PNP output capability, allowing easy interface<br />
Theory of Operation<br />
An internal Light Emitting Diode<br />
(LED) illuminates adhesives and<br />
sealants that contain fluorescent<br />
additives. When adhesive is not<br />
detected on the illuminated part,<br />
an analog or digital signal is<br />
transmitted to indicate an<br />
insufficient amount. The <strong>Loctite</strong>®<br />
Fluorescence Detector is designed<br />
for easy interface with most<br />
analog or PNP and NPN digital<br />
detection systems.<br />
Dimensions<br />
Weight<br />
Input Voltage<br />
Output Voltage<br />
NPN/PNP:<br />
Response Time<br />
Switching Frequency<br />
Light Source<br />
Spot Size<br />
Parts Included<br />
TECHNICAL SPECIFICATIONS<br />
3.1" L x 2.3" W x 1.2" D<br />
0.68 lbs.<br />
10 to 30 volts DC current (80 to 300) ma<br />
Analog Output 0 to 5.5 volts into 2.2 ohms<br />
10 ohms pull up/down resistance<br />
250 microsecond maximum<br />
2 khz<br />
LED 100,000 hours life<br />
98102: 9 mm Lens 1 mm Spot<br />
98103: 28 mm Lens 10 mm Spot<br />
98101: 50 mm Lens 12 mm Spot<br />
(1) Fluorescence Detector (Lenses Sold Separately)<br />
(1) 4-Conductor Cable with M12 Connector<br />
(1) Manual<br />
Additional Accessories Sold Separately<br />
98101 –<br />
50 mm Lens<br />
98102 –<br />
9 mm Lens<br />
98103 –<br />
28 mm Lens<br />
986091 – <strong>Loctite</strong> ® 4-Conductor Cable with M12 connector<br />
78<br />
For additional information and the full line of <strong>equipment</strong>, visit www.<strong>equipment</strong>.loctite.com.