Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
❖<br />
Replacing the batteries in your <strong>Sky+</strong><br />
remote control<br />
When the batteries in your <strong>Sky+</strong> remote control need replacing, you<br />
will require two new AA (MN1500, LR6 or UM–3) batteries.<br />
To replace the batteries:<br />
1. Hold the upper, silver part, of your <strong>Sky+</strong> remote control in one<br />
hand. With your other hand, push the catch on the battery<br />
cover upwards and remove the cover by pulling it outwards.<br />
2. Remove the old batteries from the battery compartment.<br />
3. Fit the new batteries, ensuring that you match the + and –<br />
marks on the batteries to their respective marks inside the<br />
battery compartment.<br />
4. Refit the battery cover, ensuring that the two lugs on the cover<br />
engage correctly in the casing, and that the bottom catch clicks<br />
into place.<br />
Don’t leave flat batteries in your remote control.<br />
EXTRA INFORMATION<br />
Replace both batteries at the same time.<br />
If you leave your <strong>Sky+</strong> remote control without batteries for more<br />
than 10 minutes, your remote control settings for operating your TV<br />
will be lost. In this case, after replacing the batteries, you will be able<br />
to control your <strong>Sky+</strong> set top box as normal, but you will have to<br />
reset your <strong>Sky+</strong> remote control to operate your TV. For more<br />
information, see Setting your <strong>Sky+</strong> remote control to operate your TV<br />
on page 57.<br />
<strong>Sky+</strong> User’s <strong>Guide</strong> 59