You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DOLBY<br />
TV<br />
RF lead<br />
video recorder (VCR)<br />
S-Video lead<br />
satellite<br />
dish<br />
SCART<br />
lead<br />
second<br />
TV<br />
RF lead<br />
RF lead<br />
SCART<br />
lead<br />
<strong>Sky+</strong> set<br />
top box<br />
rear<br />
panel<br />
WARNING!<br />
DISCONNECT FROM MAINS SUPPLY<br />
BEFORE REMOVING COVER<br />
NO USER SERVICEABLE PARTS INSIDE<br />
230V 0.3A 50Hz<br />
FAN<br />
DO NOT OBSTRUCT<br />
AIR VENTS!<br />
TELEPHONE<br />
LINE<br />
RF OUT - 2<br />
9V DC 50mA max. RF OUT - 1<br />
AERIAL IN<br />
VCR SCART<br />
TV SCART<br />
AUDIO<br />
OUT<br />
L<br />
R<br />
RS-232<br />
OPTICAL<br />
AUDIO OUT<br />
S-VIDEO<br />
13/18V DC<br />
350mA max.<br />
DISH INPUT 2<br />
13/18V DC<br />
350mA max.<br />
DISH INPUT 1<br />
DIGITAL INTERFACES<br />
WARNING!<br />
DISCONNECT RECEIVER FROM THE<br />
MAINS BEFORE REMOVING.<br />
ACCURATELY FOLLOW THE MODULE<br />
INSTALLATION INSTRUCTIONS.<br />
DIGITAL INTERFACES<br />
5V DC 600mA max. 3V3 DC 1.2A max.<br />
mains<br />
lead<br />
telephone lead<br />
RF lead<br />
phono<br />
leads<br />
optical digitalaudio<br />
lead<br />
terrestrial aerial<br />
stereo hi-fi system and/or<br />
digital-audio decoder and<br />
amplifier/speakers<br />
❖<br />
With the exceptions of the mains and the telephone line, all the<br />
interconnections between the rear panel of your <strong>Sky+</strong> set top box<br />
and your other equipment are safe, extra-low voltage circuits.<br />
Connecting to the telephone line<br />
The telephone lead (labelled in the diagram above) is intended for<br />
connection to standard UK telephone lines. This lead and your <strong>Sky+</strong><br />
set top box have been specifically designed for this purpose. Do not<br />
attempt to connect the telephone lead to anything other than a<br />
standard UK telephone line.<br />
CONNECTING YOUR SKY+ BOX<br />
❖<br />
Digital interface<br />
On the rear panel of your <strong>Sky+</strong> set top box there is a plate which<br />
covers a general-purpose interface. This is for future plug-in modules,<br />
which will have their own installation instructions. You must<br />
disconnect your <strong>Sky+</strong> set top box from the mains before<br />
removing the plate or plugging in a module.<br />
<strong>Sky+</strong> User’s <strong>Guide</strong> 69