FINAL SAMPLING AND ANALYSIS PLAN - Documents for Moffett Field
FINAL SAMPLING AND ANALYSIS PLAN - Documents for Moffett Field
FINAL SAMPLING AND ANALYSIS PLAN - Documents for Moffett Field
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2. Place the auger bit in the selected location and turn the auger until the 0.5 foot (6-<br />
inch) depth is obtained. Remove auger and collect sample from bit into a clean 8-<br />
ounce glass sample jar. Close the jar, label and place in cooler.<br />
2. Replace the auger bit into the original hole and continue augering until the 1 foot<br />
depth is reached. Remove auger and collect sample as above. Place excess soil back<br />
to the hole. Label a wooden stake with the sample number to mark the location <strong>for</strong><br />
confirmation sampling.<br />
3. Complete chain-of-custody record be<strong>for</strong>e taking the next sample.<br />
4. Place sample containers in an insulated cooler with ice.<br />
5. Samples will be packaged and shipped in accordance with SOP FP-F-7, Sample<br />
Handling, Storage, and Shipping (Appendix A).<br />
14.2.2 Pre-construction/Baseline Sediment Sampling Procedure<br />
Sediment samples will be collected from a shallow trench with disposable scoops. A new<br />
pair of nitrile gloves will be worn prior to sample collection. Nitrile gloves will be<br />
disposed of after each sample is collected, and a new pair will be worn be<strong>for</strong>e the next<br />
sample is collected to avoid possible cross-contamination.<br />
Using a new, individually packaged, disposable plastic scoop or equivalent, place sediment<br />
into an 8-ounce glass jar. Affix a completed sample label to the sample container. Wrap<br />
glass jar in bubble-wrap packaging material, place into resealable bags, and place sample<br />
containers into a cooler containing ice. Record sample number, time and date, and<br />
requested analysis on chain-of-custody <strong>for</strong>m. Samples will be packaged and shipped in<br />
accordance with SOP FP-F-7, Sample Handling, Storage, and Shipping procedure<br />
provided in Appendix A.<br />
14.2.3 Post-Construction Confirmation Soil Sampling Procedure<br />
The following is the soil sampling procedure <strong>for</strong> post-construction confirmation<br />
samples:<br />
1. Don a new pair of nitrile gloves.<br />
2. Place the auger bit in the selected location and turn the auger until 6-inch depth<br />
below surface is obtained. Remove auger and place soil in a stainless steel mixing<br />
bowl and homogenized. Then, place mixed soil into a clean 8-ounce glass sample<br />
jar. Close the jar, label and place in cooler.<br />
3. Label a wooden stake with the sample number to mark the location <strong>for</strong><br />
confirmation sampling.<br />
Final Sampling and Analysis Plan<br />
Installation Restoration Site 29, Hangar 1<br />
Former Naval Air Station, <strong>Moffett</strong> <strong>Field</strong>, <strong>Moffett</strong> <strong>Field</strong>,<br />
Cali<strong>for</strong>nia<br />
DCN: AMEC-8816-0005-0039<br />
April 2010<br />
Page 14-4
Change language