OPERATOR'S MANUAL - The Baker Company Blog

366D000M 1/4/2011The *FlexAIR is another type of CEC that has a 12” [304.8mm] diameter connection with a 10” [254mm]diameter spun inner baffle. It mounts directly over the exhaust filter and has flaps to reduce the amount of roomair being exhausted through the CEC. The front flap has a sensor that detects when the flap opens during lowduct exhaust conditions and triggers an alarm in the cabinet.VentToRoomCFM[L/SEC]FlexAirExhaustCFM[L/SEC]8”[203mm]Dia. DuctFlexAir Static PressureRequired (“W.C.[PA])10”[254mm] Dia.Duct12”[305mm] Dia.DuctMin Max Min Max Min Max Min MaxSG403A-HE8”[203mm]Access Opening10”[254mm]Access Opening12”[305mm] A1Access Opening12”[305mm] A2Access OpeningSG503A-HE8”[203mm]Access Opening12”[305mm]Access Opening285[135]355[168]390[184]404[191]355[168]550[260]290[137]360[170]400[189]415[196]360[170]560[265]663[313]701[331]820[387]871[411]700[331]850[402]-0.10[-25]-0.15[-38]-0.16[-40]-0.17[-42]-0.15[-37]-0.22[-55]-0.32[-80]-0.62[-155]-0.74[-185]-0.75[-182]-0.62[-155]-0.74[-185]-0.04[-10.0]-0.05[-13]-0.07[-18]-0.07[-15]-0.05[-13]-0.09[-23]-0.17[-43]-0.18[-45]-0.19[-48]-0.30[-75]-0.16[-40]-0.24[-60]-0.03[-8]-0.04[-10]-0.04[-10]-0.05[-12]-0.04[-10]-0.07[-18]-0.08[-20]-0.10[-25]-0.17[-43]-0.25[-62]-0.12[-30]-0.17[-43]SG603A-HE8”[203mm]Access Opening10”[254mm]Access Opening12”[305mm] A1Access Opening12”[305mm] A2Access Opening455[215]545[257]604[285]611[288]460[217]550[260]614[290]644[304]845[399]945[446]990[468]1114[526]-0.15[-38]-0.20[-50]-0.28[-70]-0.30[-75]-0.74[-185]-0.78[-195]-0.78[-195]-0.79[-197]-0.07[-18]-0.11[-28]-0.13[-33]-0.14[-35]-0.18[-45]-0.24[-60]-0.35[-88]-0.36[-90]-0.06[-15]-0.09[-23]-0.10[-25]-0.11[-27]-0.13[-33]-0.16[-40]-0.25[-63]-0.30[-75]* The FlexAIR CEC is Patent Pending.** NOTE: Water column suction is measured directly above the cabinet exhaust outlet before any dampers, elbows or other restrictions.Exhaust Requirements for a *FlexAIR CEC12