OPERATOR'S MANUAL - The Baker Company Blog

366D000M 1/4/2011Installation of Exhaust Transition System for SterilGARD ® e 3 CabinetsTools required:5/16 - Hex wrench and nut driver11/32 - Hex wrench and nut driver3/8 - Hex wrench and nut driver7/16 - Hex wrench and nut driver11/32 - Combination wrenchUnpacking the Transition:1) Remove contents from the shipping packaging and examine for damage. (Be careful not todamage the gasket on the bottom flange of the exhaust transition)2) Check the quantity of the components to the following packing lists and illustrations:Item #DescriptionQtySG 403A-HEQtySG 503A-HEQtySG 603A-HE1 Exhaust transition 1 1 12 Exhaust filter access cover (open face) 1 1 13 ¼”-20 x ¾” Washer head bolt 4 6 64 ¼” Seal washer 6 8 85* ¼”-20 x 1” Hex head bolt 4 4 46* ¼” Flat washer 6 6 67* ¼” Lock washer 6 6 68* ¼” 20 Double ended transition mounting bolt 2 2 29* ¼”-20 Hex nut 2 2 210* Exhaust transition mounting clip 2 2 211* Air tight damper assembly (ATD) (Optional) 1 1 112* Short exhaust collar (Optional) 1 1 113* #8-32 Hex nut 4 4 414* #8 Flat washer 4 4 415* #8 Lock washer 4 4 416 Exhaust transition gasket, ¼” x ½” 8.3 ft 10.3 ft 10.3 ft17 Access cover gasket, ¼” x ½” 6.2 ft 8.3 ft 8.3 ft18 Decon Seal Box Assembly (Optional) 1 1 119 #8-32 Hex Head Screw 8 8 8Packing List for Canopy Exhaust Connection (CEC)* = Items shipped loose in the packaging.88