OPERATOR'S MANUAL - The Baker Company Blog

366D000M 1/4/2011Step 7: Lift the cabinet high enoughto allow clearance for the standassembly to be positioned under it.Once the stand is positioned underthe cabinet, install (4) ¼”x 2" carriagebolts into the key way slots locatedunder the cabinet in each of the (4)corners. The cabinet is now ready tobe lowered onto the stand. There are(4) holes on the top of the stand whichthe bolts must be guided through. Becareful not to let the bolts drag on theedge of the holes while lowering asburrs may occur on the bolts andcause threading problems.¼”-20 carriage boltCabinetChannel standStep 8: With the cabinet resting ontop of the stand assembly, place (1)¼” flat washer, lock washer, and hexnut onto each of the bolts. Tightenafter all (4) nuts are threaded on.¼” HardwareStep 9: The lift device should be removed if not being used to move cabinet into position within the room.If the lift device is mobile it may be used to maneuver cabinet into the desired location. A blanket couldalso be placed under the leg levelers while sliding the cabinet to avoid scuffing the flooring.85