OPERATOR'S MANUAL - The Baker Company Blog

366D000M 1/4/2011has 7/16” [11.1mm] radius (rounded) corners to help prevent buildup of contaminants and aid in cleanup.Front access high velocity air slotsAt the intersection of both sidewalls and front access opening there are high velocity air slots. The purposeof the slots is to capture any particulate traveling near the sidewalls and access opening.Towel guardThe towel guards are located under the work surface at the bottom rear and sides of the return-air plenums.Acting as a protective screen, integral to the interior walls, they help prevent wipes and other paper materialsfrom being drawn into the blower system. They need to be kept clean at all times.All-metal plenumsThe plenums are constructed entirely of either carbon steel or stainless steel in order to provide strength,durability, air-tightness and resistance to deterioration.Removable recessed stainless steel work surfaceThe work surface is constructed of corrosion resistant 16-gauge type 304 stainless steel, with a satin finishthat diminishes light reflection. It is recessed to retain spills and can be removed along with its supports to gainaccess to the drain pan.Drain panThe drain pan is designed with 7/16” [11.1mm] radius in all four bottom corners to facilitate cleaning anddisinfection. Drainage is provided by a 1/2” [12.7mm] diameter stainless steel ball valve located at the bottomof the drain pan.ViewscreenThe cabinet’s 1/4” [6.35mm] safety plate glass sliding viewscreen may be opened to 20” [508.0 mm] (withoutarmrest) for placing of large items in the work area, and maybe fully closed for system shutdown or UV lightoperation. Note: the armrest must be properly re-installed prior to working in the cabinet.Work area lightingThe work area is illuminated by two external fluorescent lamps which provide a minimum of 100 footcandlesof light at the work surface.Electronic ballastThe SterilGARD ® features solid-state electronic ballasts for the fluorescent and UV (optional) lights. Theseballasts increase reliability, efficiency, and service life with lower heat output.Sponge armrest padThe armrest pad is made out of EPDM sponge material and is resistant to most chemicals and UV exposure.It is held in place with a low tack adhesive so the pad can be easily removed for cleaning. It also can beautoclaved.4