Leica TPS400 Series User Manual
Leica TPS400 Series User Manual
Leica TPS400 Series User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Start-up sequenceSets the screen the instrument starts in whenswitched on. E.g. the electronic bubble can bedisplayed at every start.Procedure:After confirming the dialogue of notification, the"Meas & Rec" screen is displayed. A maximum of 16of the next key presses are stored. The sequence isended with [ESC]. If the start sequence is activated,the stored key presses are executed automaticallywhen the instrument is switched on.The automatic start sequence has the sameeffectas pressing the keys manually. Certain instrumentsettings can not be made in this way. "Relativeentries" such as automatically setting "IR-FINE"upon switching on the instrument, are not possible.[OK] Stores current settings.[RECORD] Defines the key presses that areexecuted automatically upon start up.<strong>TPS400</strong>-5.0.1en106 Start-up sequence
Change language