Leica TPS400 Series User Manual

1. Determine area points[ALL] Starts the measurement to thepoint.[FIND] / Searches for point in internal[LIST] memory.[ENH] For manual input of the coordinates.[1PtBACK] Undo measurement or selection oflast point.The area (2D) is calculated and displayedoncethree points have been measured or selected.The area (3D) is calculated once the sloped referenceplane is defined by three points.2. Results[Def. 3D]To define the sloped referenceplane by selecting or measuringthree points.[VOLUME] To calculate a volume with constantheight. The height have to beentered or measured.[RESULT] To display and record additionalresults (perimeter, volume).Perimeter and volume are updated iffurtherarea points are added.The graphic shows always the areaprojectedonto the horizontal plane.Programs77TPS400-5.0.1en