Leica TPS400 Series User Manual

Setup step-by-step1321161. Extend the tripod legs to allow for a comfortableworking posture. Position the tripod over themarked ground point, centring it as well aspossible.2. Fasten the tribrach and instrument onto thetripod.75 4553. Turn on the instrument and switch on the laserplummet and electronic level by pressing [FNC]> [Level/Plummet].4. Move the tripod legs (1) and use the tribrachfootscrews (6) to centre the plummet (4) overthe ground point.5. Adjust the tripod legs to level the circular level(7).6. By using the electronic level turn the tribrachfootscrews (6) to precisely level the instrument.Refer to "Levelling up with the electroniclevelstep-by-step" for more information.7. Centre the instrument precisely over the groundpoint (4) by shifting the tribrach on the tripodplate (2).8. Repeat steps 6. and 7. until the required accuracyis achieved.TPS400-5.0.1en32 Measuring Preparation /Setting up