Leica TPS400 Series User Manual
Leica TPS400 Series User Manual
Leica TPS400 Series User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Stake outThis program calculates the required elements tostakeout points from coordinates or manuallyentered angles, horizontal distances and heights.Setting out differences can be displayed continuously.Setting out coordinates from memoryProcedure:Select the point.[DIST] Starts measurement and calculation ofthe stake-out elements.[REC] Saves the displayed values.[B&D] Input direction and Hz-distance of stakeout point.[MANUAL] Enables simplified input of a pointwithout PtID and without the possibilityof storing the data of the point.Polar Stake outNormal indication of polar stake out offsets Hz, , .1) Actual2) Point to be stake outHz: Angle offset: positive if point to be setoutis to the right of the actual direction. : Longitudinal offset: positive if point to bestake out is further away. : Height offset: positive if point to bestake out is higher than measured point.<strong>TPS400</strong>-5.0.1en58 Programs
Change language