Leica TPS400 Series User Manual

REFERENCE LINE - MAIN 1/2Length : 14.872 mEnter values to shift line:Offset : 1.000 mLine : 0.500 mHeight : 0.900 mRotate : 25.0000 gNewBL MEASURE STAKE SHIFT=0The following entries are possible:Offset+: Parallel offset of the reference lineto the right, referred to the directionof the base line (BP1-BP2).Line+: Longitudinal offset of the start point(=reference point) of the referenceline in the direction of base point BP2.Rotate+: Rotation of the reference line clockwisearound the reference point.Height+: Height offset; the reference line ishigher than the selected referenceheight.3. Selecting the subapplication[MEASURE] Starts the subapplication to measureLine & Offset (see issue 4).[STAKE] Starts the subapplication to stakeout (see issue 5).4. "Line & Offset" subapplicationThe "Line & Offset" subapplication calculates frommeasurements or coordinates longitudinal, paralleloffsets and height differences of the target pointrelative to the reference line.Programs69TPS400-5.0.1en