Leica TPS400 Series User Manual

Procedure:Select code from a codelist or enter a new code:[RECORD] The code is directly recorded without ameasurement with [ALL].[OK] The code is set. After a measurementwith [ALL] the code is recorded.[AddList] Adds the entered code to the codelist.Extending / editing code1. Call available code from code list.2. Attributes can be overwritten freely.Exceptions:With the codelist editor of LGO/LGO-Tools a statuscan be assigned to the attributes.• Attributes with "fixed status" (see LGO/LGO-Tools) are write-protected. They cannot be overwrittenor edited.• For attributes with status "Mandatory" an inputor a confirmation is required.• Attributes with status "Normal" can be editedfreely.Warnings / MessagesImportantMessagesAttrib. cannot bechanged !No codelist available !Entry required !MeaningAttribute with fixed status cannotbe changed.No codelist in memory. Manualinput for code and attributes arecalled automatically.Code missing. Extend input.Individually entered code blocks are notadded to the code list.Leica Geo Office Tools (LGO-Tools)Codelists can be easily created and uploaded to theinstrument using the supplied "LGO-Tools" Software.TPS400-5.0.1en92 Programs