Leica TPS400 Series User Manual

More documents

Recommendations

Info

Data TransferWith this special function measured data can be transferredvia the serial interface to a receiver (e.g. aLaptop). Using this type of transfer the success of thetransfer is not checked.Job: Selection of job from which data shouldbe transferred.Data: Select the data range to be transferred(measurements, fixed points)Format: Select output format. Select Leica-GSIformat,or your own format created inthe "Format Manager" and transfer tothe LGO/LGO-Tools.[SEND] Starts the transmission.Example:Within the "data" setting "MEASUREMENTS" a dataset could be shown as follows:11....+00000D19 21..022+1664182622..022+09635023 31..00+0000664958..16+00000344 81..00+0000334282..00-00005736 83..00+0000009187..10+00001700If the receiver is to slow in processing datathedata could be lost. With this type of data transferthe instrument is not informed about the performanceof the receiver (no protocol).GSI-ID’s11 PtID21 Horizontal direction22 Vertical angle25 Orientation31 Slope distance32 Horizontal distance33 Height difference41-49 Codes and attributes51 ppm [mm]58 Prism constants81-83 (E, N, H) Target point84-86 (E, N, H) Stand point87 Reflector height88 Instrument heightTPS400-5.0.1en112 Data Transfer
System InfoDisplays helpful information and date / time are set.• BatteryRemaining battery power (e.g. 40%).• Instr.Temp.Measured instrument temperature.• DateDisplays the current date.• TimeDisplays current time.[DATE] Change date and format.Format: There are three display formats:DD.MM.YYYYMM.DD.YYYYYYYY.MM.DDTDate: Input date[TIME] Set time.[SW-Info]The software of the instrument iscomposed of different software packages.Depending on the package,different versions are possible.Op-System: Operating SystemApp.-SW: Applications, functionsand menuLayout: User displaysSystem Info113TPS400-5.0.1en
Page 4:
Validity of this manualDescriptionG
Page 8 and 9:
Shipping ..........................
Page 10:
Special features• Easy and quickl
Page 17 and 18:
Power SupplyUse the Leica Geosystem
Page 19 and 20:
Fixed keys[PAGE] Scrolls to next pa
Page 21 and 22:
Incorrect resultReflectorlessBe sur
Page 23 and 24:
SoftkeysUnder softkeys, a selection
Page 25 and 26:
Menu tree[MENU] > - Confirm menu se
Page 27 and 28:
Inserting / Replacing Battery2. Rem
Page 29 and 30:
External power supply for totalstat
Page 31 and 32:
Careful handling of tripod• Check
Page 33 and 34:
Levelling up with the electronic le
Page 35 and 36:
Input mode - method 1In entry mode,
Page 37 and 38:
Inserting charactersIf a character
Page 39 and 40:
Character setEntry mode contains th
Page 41 and 42:
Wildcard searchThe Wildcard search
Page 43 and 44:
FNC KeyUnder [FNC] several function
Page 45 and 46:
Enter offset values!Trav. Offset: 0
Page 47 and 48:
5 [ALL] Completes the measurement a
Page 49 and 50:
Procedure:1. Measure to first prism
Page 51 and 52:
Setting StationEach coordinate comp
Page 53 and 54:
Orientation coordinates can be eith
Page 55 and 56:
Useful information• If the orient
Page 57 and 58:
SurveyingWith the program Surveying
Page 59 and 60:
Orthogonal Stake outThe position of
Page 61 and 62: Measuring facilitiesSingle face I o
Page 63 and 64: [AddPt] Input another backsight poi
Page 65 and 66: [Disable]/[Enable]Excludes/includes
Page 67 and 68: Reference LineThis program facilita
Page 69 and 70: REFERENCE LINE - MAIN 1/2Length : 1
Page 71 and 72: Example "relative to first referenc
Page 73 and 74: + The stake out point is higher tha
Page 75 and 76: Softkeys - radial method:[NewPt 1]
Page 77 and 78: 1. Determine area points[ALL] Start
Page 79 and 80: Remote HeightPoints directly above
Page 81 and 82: Measured point height is above line
Page 83 and 84: Inverse & TraverseTraverseInversed1
Page 85 and 86: Distance - DistanceBy PointsTPS800_
Page 87 and 88: Plane OffsetP2ExtensionThe "Extensi
Page 89 and 90: P4P5XZOff+XZMeasured point. This po
Page 91 and 92: Offset:X:Z:[New Tgt][STAKE][New Pla
Page 93 and 94: SettingsThis menu enables extensive
Page 95 and 96: BeepThe beep is an acoustic signal
Page 97 and 98: gon possible angle values: 0 gon to
Page 99 and 100: RL-StandardFor distance measurement
Page 101 and 102: [SCALE]Scale of projection.[ATMOS]I
Page 103 and 104: File ManagementThe File Manager con
Page 105 and 106: [DELETE] Starts deleting process wi
Page 107 and 108: CalibrationsDetermining Line-of-sig
Page 109 and 110: Hz-collimationV-indexDisplay adjust
Page 111: COMM ParametersFor data transfer be
Page 115 and 116: Care and StorageTransportWhen trans
Page 117 and 118: If the product becomes wet, leave i
Page 119 and 120: Checking and adjustingTripodCircula
Page 121 and 122: Depending on brightness and surface
Page 123 and 124: • Use of products with obviously
Page 125 and 126: Hazards of Use WARNINGThe absence o
Page 127 and 128: Precautions:Adhere to the instructi
Page 129 and 130: Laser classificationGeneralThe foll
Page 131 and 132: LabellingType: TC.... Art.No.: ....
Page 133 and 134: WARNINGPotential hazards are not on
Page 135 and 136: Type: TC.... Art.No.: ......Power:
Page 137 and 138: Laser plummetThe laser plummet buil
Page 139 and 140: 1) Exit for laser beam2) Laser beam
Page 141 and 142: FCC Statement (Applicable in U.S.)
Page 143 and 144: Technical DataTelescope• Transit
Page 145 and 146: • External supply(via serial inte
Page 147 and 148: Distance measurement (RL: Reflector
Page 149 and 150: Atmospheric correctionThe distance
Page 151 and 152: Reduction formulaeThe instrument ca
Page 153 and 154: International Limited Warranty, Sof
Page 155 and 156: IndexAAbbreviations ...............
Page 157 and 158: GSI-coding ........................
Page 159 and 160: Parity ............................
Page 161 and 162: ZZenith ...........................
show all

Leica TPS400 Series User Manual

Create successful ePaper yourself

Delete template?

Save as template?