Leica TPS400 Series User Manual
Leica TPS400 Series User Manual
Leica TPS400 Series User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Warnings / MessagesImportant Messages Meaning MeasuresV-Angle not suitable forcalibration (Check V-angleor face) !Calibration result out oftolerance. Previous valuesretained !Hz-Angle out of limit !Measurement Error. Tryagain.Aiming tolerance not met or telescope position/facenot changed.Computed values out of tolerance.Previous values retained.Hz-angle in second face/telescope pos.deviates more than 5 gon from the targetpoint.Measurement error appeared (e.g. instableset up or period between measuring in telescopeposition I and II too long).Aim on the target point with an accuracy ofmin. 5 gon. The target point must beapproximately in the horizontal plane.Confirmation of the message required.Repeat measurements.Confirmation of the message required.Aim on the target point with an accuracy ofmin. 5 gon.Confirmation of the message required.Repeat the process.Confirmation of the message required.<strong>TPS400</strong>-5.0.1en110 Calibrations