Leica TPS400 Series User Manual
Leica TPS400 Series User Manual
Leica TPS400 Series User Manual
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Standing axis inclinationAngle between plumb line andstanding axis. Standing axis tilt isnot an instrument error and is noteliminated by measuring in bothfaces. Any possible influence it mayhave on the Hz-direction resp. V-angle is eliminate by the dual axiscompensator.Line-of-sight error (Hz-collimation)The line-of-sight error is the deviationfrom the perpendicularbetween tilting axis and line-ofsight.This could be eliminated bymeasuring in both faces.V-Index (Vertical index error)With horizontal line-of-sight the V-circle reading should be exactly90°(100gon). The deviation fromthis values is termed V-index (i).Plumb line / CompensatorDirection of gravity. The compensatordefines the plumb line withinthe instrument.ZenithPoint on the plumb line above theobserver.ReticleGlass plate within the telescopewith reticle.Introduction13<strong>TPS400</strong>-5.0.1en
Change language