Leica TPS400 Series User Manual

Setting up the tripod1. Loosen the clamping screws on the tripod legs,pull out to the required length and tighten theclamps.2. In order to guarantee a firm foothold sufficientlypress the tripod legs into the ground. Whenpressing the legs into the ground note that theforce must be applied along the legs.When setting up the tripod pay attention to ahorizontal position of the tripod plate.Slight corrections of inclination can be made with thefoot screws of the tribrach. Larger corrections mustbe done with the tripod legs.When using a tribrach with an opticalplummet,the laser plummet cannot be used.TPS400-5.0.1en30 Measuring Preparation /Setting up