Leica TPS400 Series User Manual

Reference LineThis program facilitates the easy stake out orchecking of lines for buildings, sections of road,simple excavations, etc.A reference line can be defined by referencing aknown base line. The reference line can be offseteither longitudinally, in parallel or vertically to thebase line, or be rotated around the first base point asrequired.Procedure:1. Definition of the Base line:The base line is fixed by two base points that can bedefined in three ways:• Measured points• Enter coordinates using keypad• Select point from memory.a) Measuring base points:Input PtID and measure base points with [ALL]or [DIST] / [REC].b) Base points with coordinates:[FIND] Starts to search for the PtIDentered.[ENH][LIST]Manually input coordinates.Displays the list of available points.Analogue procedure for the second base point.TPS800_Z361) 1st base point2) 2nd base point3) Base line4) Reference linePrograms67TPS400-5.0.1en