Leica TPS400 Series User Manual

Useful information• If the orientation is only measured in telescopeposition II the Hz-orientation is based on telescopeposition II. If measured only in telescopeposition I or mixed the Hz-orientation is basedon telescope position I.• The prism height may not be changed duringmeasurements in the first and second telescopeposition.• If a target point is measured several times in thesame telescope position the last valid measurementis used for the computation.If no orientation was set and an applicationwasstarted resp. if in "Meas & Rec" [ALL] or [REC]was triggered, then the current Hz-direction and V-angle are set as orientation.Programs55TPS400-5.0.1en