Thermo Scientific Orion 2110XP Ammonia Analyzer

Chapter II Analyzer PreparationUnpacking theAnalyzerThermo Scientific Orion analyzers are assembled, tested and packaged withgreat care. Refer to Figure II-1.Report any obvious damage of shipping container to carrier and hold forinspection. The carrier (not Thermo Fisher Scientific) is responsible for anydamage incurred during shipment.1. Open the outer box. Remove the top two foam corner support pieces.2. Open the inner box. This box should contain the analyzer and ATCtemperature probe, ammonia electrode box, reference electrode box,ammonia standard solutions kit (two 2 oz bottles of 191 ppm ammoniastandard and two x 2 oz bottles of 1920 ppm ammonia standard), theoptions kit and user guide CD.3. Remove the cardboard retaining shell by sliding it over the entiremounting board and the analyzer.4. Carefully remove the entire mounting board with analyzer from theinner box.Note: Do not lift or pull the analyzer by the fluidics or theelectronic components.5. Unbolt the analyzer from the mounting board by removing the fourmounting bolts with a 9/16 wrench. These bolts may be discarded.6. Carefully place the analyzer at a convenient location until properinstallation can be completed.Figure II-1Unpacking the AnalyzerThermo Scientific Orion 2110XP Ammonia Analyzer User GuideII-1