Inclination sensors

Sensors formobile applicationsInductive sensorsInductive efector m sensorse1 type approval of the GermanFederal Office for Motor Traffic.Increased temperature rangefrom -40...85 °C.IP 69 K and IP 67: Ingress-resistanteven under severe environmental.Increased EMC resistance: 100 V/maccording to automotive standards.Wide voltage range of 10...60 V DCand increased sensing range.Inductive efector msensorsInductive sensors for extreme applicationsThe new efector m units with increased sensing rangeof the mobile series are specially adapted for use in vehicles.The e1 type approval of the German Federal Office forMotor Traffic certifies that the units comply with theautomotive standards and can therefore be installed onvehicles without invalidating their operating permit.The units with stainless steel housings pass environmentaltests without problem, for example salt spray test,temperature / humidity cycles, continuous shocks andvibrations.The permissible application range of the sensors covers-40...85 °C. Furthermore, the units are insensitive torapid temperature changes.The sensors of the mobile efector m series are distinguishedby their superb ingress resistance and withstandeven high-pressure cleaning without problem. This isevidenced by the protection rating IP 69 K.A voltage range of 10...60 V ensures that even highfluctuations in the on-board supply system do not causeany problems.Connectors and splitter boxesType Description Orderno.Mounting clamp M12Mounting clamp M18Mounting clamp M30Angle bracket M12 x 1Angle bracket M18 x 1Angle bracket M30 x 1.5E11047E11048E11049E10735E10736E10737Further accessories are available starting on page 139Further connectors and splitter boxes are availablestarting on page 129Sensors formobile applicationsSensorswith CANinterfaceAnaloguesensors /switchesSensors formobile applicationsInductiveefector msensorsInclinationsensorsInductivesensorsPage110 - 111112 - 113114 - 117114