Inclination sensors

More documents

Recommendations

Info

SIMorder no. CR 3100GSMRS 232ONERRORCANDiagnosis and serviceRemote maintenance and data memoryCAN interface and CAN diagnosisSystem descriptionIntroductionIn times of globalisation of the markets the distances to the customer areincreasing. The costs for the provision of services as well as shortening ofdowntimes in case of malfunctions are becoming more and more important.Therefore manufacturers of plant and machinery are using the fast and inexpensiveon-site diagnostic tools to an increasing extent. Even more efficient:Remote diagnosis by means of radio connection.The diagnosis and service units CANcom, CANmem and CANview not onlysupport the application programmer, but also the end user.RS 232POWER/CAN ANT.Remote diagnosis – online connection around the globeNormally a programming or operational data logging system is directlyconnected to a control system in the machine via a fixed cable connection.To do so the usual interfaces (e.g. RS-232, Ethernet) or field buses (e.g.CAN) are used.In most cases access and data exchange are made via PC or notebook. Forstationary machines and installations the connection is made by means ofthe components installed in the control cabinet.It is more difficult if a system is not in a fixed place, like a mobile machine.The service technicians are usually not on site and if a service is required it isin most cases very time-consuming and expensive.This problem can only be solved by using a wireless connection to the machine.Service and operating data can be exchanged in the open field.Among radio connections the GSM network (Global System for Mobile communication)is currently the best option for telecommunication. GSM offersgood availability and can be used internationally. Furthermore GSM cannotonly transmit language but also data, the latter being used for the connectionto the machine controller.One of the most well-known services of the GSM network is the Short MessageService (SMS). It serves for the exchange of short text messagesbetween GSM units. If the remote station is not available SMS messages arestored with the network provider over a longer period of time and deliveredwhen the receiver is available again.GPRS (General Packet Radio Services) is a new mobile radio technology forfast data transmission. It also uses the GSM radio network. In contrast to thecurrent GSM communication, the data is condensed into packets that can betransmitted via the radio network depending on customer needs and systemcapacity. At the receiver these data packets are reassembled. So GPRSachieves not only higher transmission speeds but also a permanently activeradio connection. The incurred communication cost is only calculated on thebasis of the transmitted data volumes (e.g. new configuration data) andnot on the connection time. Because of the structure of the data packetsthey are exchanged in the network similar to TCP/IP communication. Thisenables, for example, simple access to machine data via the internet.Transmission ofmachine datadirectly from thecontroller.Visit our website: www.ifm.com88
Remote maintenance anddata memory, CAN interfaceand CAN diagnosisThe CAN / GSM / GPRS radio gateway CANcomThe Short Message Service and the transmission of larger amounts of datavia a special network service are also used by the CANcom radio gatewaywith integrated CAN interface. In principle a radio modem is designed like anormal mobile telephone. Only the keyboard and the display are missing.The data are put in and transmitted digitally directly from the connectedcontroller. To do this the CANcom is connected to the controller via the integratedCAN gateway. It also converts and processes the data between theCAN and GSM networks. Before transmission all data are converted into atext. The GSM test and safety mechanisms monitor the correctness of thetransmitted data.Due to its compact and robust design CANcom can be used directly in themachine. The 5-pole M12 round connector is for the connection to the CANbus in the machine and for the voltage supply. The standardised aerial connectionenables the use of application-related aerials. The slot for the SIMcard has a protective cover. There is also a serial RS-232 interface via whichan update of the firmware can be made if necessary.CANcom provides special function calls to the programmer for controllingand processing the data. The messages are transmitted as SMS, fax, e-mailor via GPRS. Using the SIM data card, larger data volumes can also be transmittedat low cost.Online connectionto the centralcontrol stationvia GSM radionetwork.GeneralinformationList of articlesMobilecontrollersI/O-modulesDialoguemodulesSensorsfor mobileapplicationsTechnicalinformationand customerserviceAccessoriesConnectiontechnologySignalconvertersDiagnosisand serviceCANcom Basisstation,GSM connectiondirectlyfrom the PC.The PC software “CANcom Basisstation” is used for the connection of theservice centre to the machine. In addition to a safe, password-protectedestablishing of the connection it also offers the possibility to manage SMSdata and a directory. After establishing an online connection it can alsoestablish a connection to further PC software (e.g. CAN bus monitor CANmon)which then has direct access to the CAN bus of the machine via theGSM network.Visit our website: www.ifm.com89
Page 1 and 2:
Control systemsfor mobile vehiclesC
Page 3:
General informationNotes and explan
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
Page 23 and 24:
List of articlesOrder numbersin alp
Page 25:
Order numbersin alphanumeric orderO
Page 28 and 29:
Mobile controllersControllers and s
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39: Mobile controllersControllers and s
Page 53 and 54: I/O modulesTechnicalinformationand
Page 55 and 56: I/O moduleswith CANopen interfaceCo
Page 57 and 58: I/O moduleswith CANopen interfaceCa
Page 59 and 60: I/O moduleswith CANopen interfaceTe
Page 61 and 62: I/O moduleswith CANopen interfaceCo
Page 63 and 64: I/O moduleswith CANopen interfaceSm
Page 65 and 66: I/O moduleswith CANopen interfaceCa
Page 67: I/O moduleswith CANopen interfaceKe
Page 70 and 71: Dialogue modulesDisplays, input mod
Page 87: Diagnosis and serviceTechnicalinfor
Page 91 and 92: Remote maintenance anddata memory,
Page 93 and 94: Remote maintenance anddata memory,
Page 95 and 96: Remote maintenanceand data memoryCA
Page 97 and 98: Remote maintenanceand data memoryCA
Page 99: CAN interfaceand CAN diagnosisCANvi
Page 102 and 103: Sensors formobile applicationsIncli
Page 104 and 105: Sensors formobile applicationsInduc
Page 106 and 107: Sensors formobile applicationsPress
Page 118 and 119: Sensors formobile applicationsPress
Page 121 and 122: Signal convertersGeneralinformation
Page 123 and 124: Frequency, currentand voltage conve
Page 125 and 126: Frequency, currentand voltage conve
Page 127: Frequency, currentand voltage conve
Page 130 and 131: Connection technologyM12 connectors
Page 139 and 140:
AccessoriesList of articlesGenerali
Page 141 and 142:
Accessories for control systemsIllu
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Accessories for control systemsTech
Page 151 and 152:
Page 153:
Technicalinformationand customerser
Page 156 and 157:
Technical informationand customer s
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
I/O modules1 type CR ....3969232272
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212:
visit our website:www.ifm.comOvervi
show all

Inclination sensors

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?